冰凍式氣體干燥處理機
◆產品的特點 Product features
致冷及空氣的控制系統,經學者準確度確定,設定規格均留20%左右的空間。制泠再壓宿機用360度轉盤式或渦旋壓解機式、活塞式式全封式式制泠再壓宿機及半全封式絲杠式制泠再壓宿機(20HP以內),使用保持穩定,空調噪聲低,效果可信,耗電使用時間長。能耗分類比好,防護系統分類為IP54(防爆及防濺)
熱更換器、風冷凝劑器選取優良無縫鋼管帶純鋁鰭片,攏流結構的類型熱交換勞動生產率好、以求體積太小,結構的類型狹窄。筒節板材選取不銹鋼材質或碳鋼板熱浸鍍鋅,可盡量避免對壓縮的空氣的的二級感染。制冷劑抑制pcb板特性達標率。具供熱公司脹大閥的節流穩壓技能,白氣旁通閥的電量轉換技能,過電壓、過裝載、空調制冷劑高壓低壓維護等技能。
液固分開器通過颶風分開與不銹綱絲網捕霧生產通過,極具液固分開目的切底,逃避的水分的2次減壓蒸餾,確保安全生產冷干機的潮濕目的。它比颶風分開器特點好,的同時又比濾水式液固分開器運行成體低,極具特點售價比。水空調蒸發器器為特色低翅空調銅管,慢水、多沖程,傳熱速率好,常期運行不應該積垢。時控落水管器按需制定,除水加能效,目的好;浮球式,電子器件時控自選擇。外馬達轉子冷葉輪,大風大雨量、低環境噪聲,過于頻繁停止長使用期。
承受壓力零件裝置框架的設計科學,能夠檢修大保養;從表面熱噴塑,性能顏值,不銹跡;無基礎上怎么安裝,運營順暢無噪聲,處理率低,無使用量品,運營花費少,連續式運營不須人員為你守候。
Refrigeration and air system, the experts accurate calculation, design parameters are left more than 20% of the surplus. Refrigeration compressors adopt international advanced rotary or scroll type, piston enclosed refrigeration compressor and close partly screw refrigeration compressor (20 HP above), stable operation, low noise, reliable performance, save electricity long life. Can effect comparing high, protection grade for IP54 (dust and splash)
Heat exchanger, wind condenser copper pipe with high quality with pure aluminum fins on heat flow structure, high yield, and thus, small size, structure compact. The cylinder body materials selecting stainless steel or carbon steel galvanized, can avoid to compressed air of the secondary pollution. Refrigeration control elements adopt the most advanced Denmark danfoss (DANROSS) and the Persian LAN (SPORLAN), (ALCO) refrigeration components, excellent performance. Thermal expansion valve with the throttling step-down function, heat the by-pass energy adjustment function, over electric current, the load, cold media high voltage protection.
Liquid-vapor separator using whirlwind separation and stainless steel wire the organic combination of the trap with gas liquid separation effect of moisture, avoid completely secondary evaporation, ensure the blotting etc.is dry effect. It than cyclone separator performance is good, at the same time than a gas-liquid separator filter brand-newly type use adult, and has a low price is high performance. Water condenser copper pipe for high quality, low wing, stroke, slow flow in high thermal efficiency, use for a long time shoulds not be scaled. Automatic drainage device according to the needs, in addition to water and energy saving set, the effect is good; Float type, electronic timing can choose.The cold wind, big rotor fan air, low noise, long life. Stop frequent rev.
Parts are confined by national gb1501998 "steel pressure vessel" and GB151-1999 "tubular heat exchanger of manufacture, test and check and accept," pressure vessel safety technology supervision code "supervision. Equipment structure design is reasonable, facilitate maintenance; The surface heat spraying, beautiful appearance, not rust; No basis installation, smooth operation no vibration, maintenance rate is low, no consumables, operation cost less, without waiting for continuous operation special.
工作必要條件與高股票技術指標值 Working condition and technical indexes | |
進氣溫濕度 The inlet temperature |
常溫型≤50℃,室溫型≤80℃ |
閉式冷卻塔途徑 Cooling way |
風冷(水冷散熱) |
區域環境的溫度 Environment temperature |
≤40℃(風冷) |
各種壓力露點 Pressure dew point |
1.7℃~10℃(0.7 MPa) |
制冰劑 Refrigerants |
R-22或會按照企業想要可所采用R134a,R404 a,R507等無氟干凈制冰劑。 |
進氣氣壓 The inlet pressure |
0.2~1.0MPa(6.4 MPa下例接受了備貨) |
負擔重大損失 The pressure loss |
≤0.02 MPa |
制冷水水進室內溫度 Cooling water inlet water temperature |
≤32℃(散熱) |
水冷卻循環水漏液壓強 Cooling water feed water pressure |
0.15~0.4 MPa(風冷) |
◆首要技術設備性能指標 Main technical parameters
ADH |
-5F |
-10F |
-20F |
-30F |
-60F |
-75F |
-120F |
-150F |
-200F |
-250F |
-300F |
-400F | |
凈化排污量 Capacity m3/min |
0.7 |
1.6 |
2.6 |
3.8 |
7.0 |
8.5 |
13.5 |
17 |
23 |
27 |
34 |
45 | |
工作中壓力值 Work pressure |
| ||||||||||||
露點溫度 Dew point temperature |
| ||||||||||||
制冷設備劑 Refrigerants |
R-12 |
| |||||||||||
主機電源 Power |
|
| |||||||||||
減少機馬力 Compressor power(KW) |
0.18 |
0.28 |
0.6 |
0.75 |
1.1 |
1.3 |
2.2 |
2.9 |
3.7 |
4.8 |
5.5 |
7.5 | |
散熱風扇電機馬達公率 Fan motor power(W) |
30 |
170 |
170 |
180 |
300 |
300 |
510 |
510 |
600 |
720 |
900 |
1200 | |
標準接口圖片尺寸 Interface size |
ZG1/2" |
ZG1" |
ZG1" |
ZG1.5" |
ZG1.5" |
ZG2" |
DN80FL |
DN80FL |
DN80FL |
DN80FL |
DN80FL |
DN80FL | |
形壯尺寸 Appearance and size |
長L(mm) |
530 |
800 |
800 |
800 |
1100 |
1100 |
1550 |
1400 |
1550 |
1800 |
1900 |
2000 |
寬W(mm) |
360 |
450 |
450 |
450 |
600 |
600 |
650 |
780 |
780 |
780 |
950 |
950 | |
高H(mm) |
490 |
970 |
970 |
970 |
1250 |
1250 |
1480 |
1580 |
1580 |
1580 |
1800 |
1800 | |
重量 Weight(kg) |
50 |
95 |
100 |
100 |
210 |
250 |
350 |
470 |
550 |
650 |
800 |
1000 |