噴塑機械產品系列

STR-NKP-1型通風管道表面噴漆器  Spraying machine for piping inner wall

◆常用領域 Applicable scope

適合于小眼及大型熱力pvc管道網的內腔表面層處理，它是使用無氣靜電粉末噴涂機運輸來的低壓油漆油漆，在定制的噴頭，使油漆油漆霧化吸入后會確立嗽叭形（園錐型、漏空），更加均勻地噴在熱力pvc管道網內表面層，最后保證 熱力pvc管道網的表面層處理。 NKP-1型最主要的使可用Ф50-Ф300mm的輸送管道，內墻乳膠漆107硅橡膠粘度不恰多于80秒（4號福特杯）。如藝術涂料粘度指數高與80秒，要加溶液溶解。NKP-1型基本性上不再通風管道長局限，但建議不立于15米。

Apply YuXiaoKong and medium pipe wall coating, it is to use it without gas transmission to high voltage coating, through the special nozzle, to make the paint spray directly formed after flared (garden tapered, hollow), evenly spray in the pipe inner surface, so as to realize the pipe coating. NKP-type 1 is mainly used in Ф 50-Ф 300 mm pipe, coating viscosity shall not be higher than the 80 seconds (4 ford cup). If the paint is higher than 80 seconds, viscosity should be diluted solvent. NKP-type 1 basically from piping length restrictions, but had better not longer than 15 meters.

使用方框圖 Installation to which