Q32產品履帶拋丸除去機

◆產品設備優勢特點 Product features

本固定式、履帶式通過式拋丸機最適合多產品，大中成批制造產品鋁件的表面能除銹設備或拋丸進階，進行清理產品鋁件必要是不能怕磕碰的單重在150kg下例的鑄件及熱治理件，此機既可手機單機運用，又可配線運用. 應屬冶煉機誡標準。

手動：將鋼件植入天然橡膠履帶滾筒中，方法成員鍵后“正常運作”按紐，拋丸室門氣動平衡退出，拋丸除去剛剛開始，履帶往前正常運作，鋼件迅速地確定翻滾，強勢拋丸器將拋丸繞城高速拋射入稍后翻滾的鋼件外壁上，鋼件可齊全更加均勻地取得除去。鋼丸完成履攜帶的溜孔流通量錐形氣流皮帶氣流輸送機，再將鋼丸氣流氣流輸送貨到斗式升降機，經斗式升降機升降到分割器，被分割后手機存儲以備。拋丸開始和結束后，拋丸室門手動開起，履帶轉反，將鋼件卸出。

帶有大量手動：什么是服務器是借助速度轉回的水泵葉輪將彈丸拋向履帶內不斷轉動的鑄件上，故而達到除去鑄件的目的性。它使使用各大銀行業中的不同規格的中小型鑄件、鍛件、沖壓模具件、小齒輪、扭簧等件的清砂、除銹防銹、去硫化皮和外表精煉。遠程服務器是總體在中國外水平，方案開發管理的新食品，就是一種除去熱效率好、框架密集、嗓聲小、成套電氣性好的除去產品。

This machine is suitable for various  large and medium-sized batch production of workpiece surface derusting or peen-forming strengthening, clean up the work-piece must be not afraid of the collision of the single is is 150 kg of the casting and heat treatment, the machine can not only a single use, and wiring use. Belong to casting machinery.

Automatic: the workpiece in rubber crawler roller, the operating personnel press "run" button,  shot room door close behind, pneumatic blast cleaning began to run forward, tracked, workpiece constantly, efficient and powerful shot peen-forming high-speed mixer trajectory to is back on the surface of workpiece, workpiece can completely evenly clear. Steel shot through the crawler sneak into the hole, then screw conveyor will be sent to the steel shot a hoist, a type of the hoist to ascend to the separator, separated by storage to use. Is shot ended, is shot room door open automatically, tracked reversal, discharged the workpiece.

Manual operation: This machine uses high-speed rotary projectile impeller will throw to turn over the workpiece in continuous caterpillar, so as to achieve the purpose of cleaning up the workpiece. It is used in the industries of small-sized castings, forgings, stamping, gear, springs, and a rust-removing, derusting, to oxide skin and surface strengthening. This machine is comprehensive technology, the development of domestic and foreign design new products, it is a kind of cleaning efficiency high, compact structure, the noise is small, systematic good cleaning equipment.

◆車輛顯著特點 Product features

1.遠程服務器用于了懸臂抽濾式拋丸器，含有安全使用使用壽命和的結構單純等性能。

2.進行BE型破乳器，擁有好的的破乳目的和生產率，對提高自己葉尖有及時的用途。

3.選取袋式排塵器，塵土廢氣排放濃硫酸濃度不高于中國法律法規的規范標準，大地面促進了使用者的勞動力環保。

4.運用耐腐蝕再生膠履帶，減少了對鋼件的相撞及損害的情況，降低了產品的的噪音。

1. The machine adopts the cantilever centrifugal peen-forming device, with long service life and simple structure.

2. The BE separator has the good separation results and higher productivity, which has positive effec to the blade.

3. The bag filter, dust emission concentrations below the standards prescribed by the state, have greatly improved operator working environment.

4. The wear-resisting rubber crawler, less on the collision and damage, reduce the noise of the machines.

◆使用位置 Applicable scope

      壓鑄件、細密鑄件、細密鍛件等的清除、光飾。快速清理熱工作件、鑄件、鍛件的外表氧化的皮。板彈簧的精煉。鎖緊螺栓件防銹和前工作。

1、圖案填充意大利90朝代末的拋丸機廠家來國內自主研發化研發。

2、通過直聯雙固拋丸器，傳輸高效率好，拋丸量大。

3、風選隔離法器、丸砂隔離法率不超99%。

4、彈丸蓋住平均，無拋丸墻角。

5、耐磨損件食用平均期限長，換個十分迅速。

6、主設備低的噪音進行。

7、電熱器采取繼電熱器（或PLC）管理，管理柜、聲光報警器器報警器安裝，PC通過三菱數控系統的產品品牌，大部分原功率器件通過歐姆龍合資經營的產品品牌進行操作簡潔、靠普。

Die casting, precision casting, precision forging of cleaning, light ornaments. Remove heat-treated pieces, castings, forgings surface oxide skin. The  strengthening of the spring. Fasteners derusting and former processing.

1. Reference to Germany at the end of the ninety’s shot used the machine manufacturing.

2. The efficient direct coupling strength is shot, transfer the high efficiency, is shot amount is large.

3. Efficient wind separator, pill isolating rate of more than 99% of sand.

4. Projectile enclothe even, without peen-forming blind angle.

5. Wear parts of long service life, change quickly.

6. Low noise operation.

7. Electrical use relay (or PLC) control, control cabinets, sound and light alarm device, PC using mitsubishi brand,mainly by Siemens brand original device operation is simple, reliable joint venture.

◆關鍵技能技術指標 Main technical parameters